Summer time jumpsuit for youngsters to stitch on // PeerDIY


Overalls and jumpsuits are among the many nice style favorites of the summer time. Our mannequin of pink linen not solely seems to be lovable, however is nice for climbing on the playground.


  • 1.20 x 1.20 m linen, pink
  • Zipper, pink, 30cm
  • possibly some fleece-line



Summery Jumpsuit // PeerDIY
© Initiative Handarbeit

Find out how to Sew the Jumpsuit:


Obtain the sample and reduce 2x the entrance half within the materials break, 4x the again half, 1x the pants in entrance within the materials break and 2x the trousers within the again.

The sample may be discovered at no cost obtain


Step 1:

The highest is reduce at an angle reduce, if it expands very a lot, iron a skinny strip of fleece to the neckline and armhole. Line the trouser elements in any respect edges, besides on the prime. Sew the pants alongside the edges and again to the mark on the zipper and iron the seam. Pin the folds on the prime and repair them with a seam at approx. 0.5 cm.

Step 2:

Iron and staple the wrinkles on the legs. Fold the hem 2 cm. As soon as at about 1.eight cm and as soon as simply sew subsequent to the sting, the folds seize it. For the higher half, first sew collectively the 2 material layers from the entrance half on the neck and arm proper to the fitting. Sew the seam allowance on the interior layer subsequent to the seam (a bit tough). The entrance piece will fall and the sting can be ironed in order that you don’t see a seam on the skin edge. Additionally proceed with the again elements of the neck and arm.

Step 3:

Now sew the edges collectively from the highest. That’s, the elements are positioned one on prime of the opposite. There’s an interior scenario and an outer scenario. The interior layer of the higher half is sewn to the interior layer of the again, in addition to the outer layers. The seams between them ought to hit one another precisely, ideally with needles caught. Iron the seams. The shoulder seam is a bit tough. Insert the straps into one another in order that the fitting sides of the material are on prime of one another, quilt at 1 cm and switch over.

Step 4:

Sew the trousers to the outer layer from the higher half all spherical, iron the seam allowance upwards. Iron the seam allowance on the again 2 cm, put the zipper beneath and topstitch. Make it possible for the zipper on the neck is flush on the prime. Flip the decrease fringe of the interior layer from the higher half approx. 0.7 cm or overcast and don’t fold. Fold the interior layer of the zipper 2 cm and stitch it by hand on the zipper.

Step 5:

Pin the interior layer with needles on the trousers. Quilt into the seam from the skin and take the scenario with you.

You might be searching for extra concepts to tinker along with your youngsters? Then look over right here:
DIY concepts for households

Show More

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button

Adblock Detected

Please consider supporting us by disabling your ad blocker